StarCraft World

LEAGUE => Support Center => Topic started by: heavymachinegun on February 19, 2021, 01:10:37 pm

Title: scw 23 5.0 map
Post by: heavymachinegun on February 19, 2021, 01:10:37 pm
can the creator of the map add the edge tiles to 3 and 9 chokes so that zergs can wall in with 4 or less sunkens, please? zealots usually bypass the zerg wall through the hole in the bottom of the sunken choke
Title: Re: scw 23 5.0 map
Post by: FaINeR on February 19, 2021, 01:40:06 pm
It is not necessary on spots 3 and 9 because it can be blocked with 3 sunkeys easily and fast if you place the hatcherie well
Title: Re: scw 23 5.0 map
Post by: heavymachinegun on February 19, 2021, 02:11:14 pm
when you place the hatchery at the bottom of the choke the larva just die off the creep
Title: Re: scw 23 5.0 map
Post by: FaINeR on February 19, 2021, 02:42:05 pm
I do not know how the larva dies by placing the hatcherie part bottom choke 3 o 9. How to position I mean put the hatcherie in the middle to have 2 sunkeys both sides quickly.

If you look at map 5.0 all the chokes to block are 2 gatways and one pylon, or hatcherie and 3 sunkeys.

Map 1.0 Kokane wanted all inputs to be equal to chokes 12 and 6 like the regular space map, that is, to block need 3 gatways or hatcherie with 4 sunkeys , so I did so the 8 chokes are the same size. I have never liked the entry of the original 12 and 6 space.
Title: Re: scw 23 5.0 map
Post by: heavymachinegun on February 19, 2021, 06:24:08 pm
the creep doesn't expand at the bottom edge of any surface so if the larva spawn off creep they die

also 1 hat and 2, 3 or 4 sunken dont wall if the hat is centered
Title: Re: scw 23 5.0 map
Post by: FaINeR on February 19, 2021, 10:00:27 pm
show me how die the larva after i show you how block ok
Title: Re: scw 23 5.0 map
Post by: heavymachinegun on February 20, 2021, 01:28:07 pm
place a hatchery at the bottom edge of any (regular) surface, then place a sunken at each side of the hatchery next to the bottom edge